产品中心
product center

SST-Inox

发布时间:2020-02-04

创新点:CrazyDrill SST-Inox采用“长”设计,适用于钻进深度为6~40 x d的不锈钢材料。它具有最高的切削速度和进给量,较长的刀具寿命和较高的工艺可靠性。


What's new: CrazyDrill Cool SST-Inox is now also available for drilling depths of 30 x d and 40 x d.

This drill has been specifically developed for rustproof, acid- and heat resistant steels as well as for

CrCo alloys. Previously unreached performance is now possible based on a new cutting edge geometry

and a new coolant duct shape, which provides massive cooling of the cutting edges. The new high

performance coating is wear resistant and assures continuous chip evacuation.

The features: The bore up to a maximum depth of 40 x d is performed in a single feed stroke. Thanks

to the new cutting edge geometry and the flute profile optimal chip breaking and chip evacuation are

guaranteed.

The newly conceived helical, drop shaped coolant ducts deliver the highest coolant effect (one to four

times larger coolant quantity reaches the tip of the tool, compared to round shaped ducts). Hence

better feed, speed and tool life are guaranteed.

Diameter range: 1 mm to 6.35 mm

Drilling depth: 6 x d, 10 x d, 15 x d, 20 x d, 30 x d and 40 x d

Coating: eXedur SNP

创新点:CrazyDrill Cool SST-Inox系列现在也可以达到30 x d40 x d的深度长径比。这种钻头是专为不锈钢、耐热和Cr-Co合金合金开发的。基于新的切削刃几何形状和新的冷却孔形状,新的高性能涂层,从而实现流畅的排屑,充分的冷却从而达到性能的新高度。

特点:钻孔最大深度40 x d可以一钻到底。由于新的切削刃几何形状和凹槽形状,最佳的断屑和排屑得到了保证。新设计的螺旋槽形状、水滴形冷却水孔提供了最高的冷却剂效果,因此速度和刀具寿命得到保证。

直径范围:1毫米至6.35毫米

钻孔深度:6×d, 10×d, 15×d, 20×d, 30×d40×d

涂层:eXedur SNP 


                                                                                                                                                    

<>
  • SST-Inox
在线咨询
客服
联系电话
021-34970326
传真
021-34970327